The Desco 10558 is a 5 Gallon, Bag-In-A-Box of Statguard® ESD Floor Cleaner. Formulated to clean floors with Statguard® Dissipative Floor Finish, Statguard® Low-VOC Dissipative Floor Finish, ESD Floor Tiles (Such as Statguard® ESD Floor Tiles) and all other treated ESD Floors. This cleaner contains anti-static agents that will rejuvenate and improve the ESD Properties of the flooring surface, without leaving behind residue that can impede dissipative or conductive properties of the flooring material or finish.
Application -
Heavy to Moderate Traffic Floors: Can be cleaned once a week with Statguard® ESD Floor Cleaner
Light Traffic Floors: Can be cleaned 2-3 times a month or as needed
*Testing a small area of your floor is recommended, if Statguard® ESD Floor Cleaner has Not been used before.
Cleaning Application -
1. Push broom the surface to be cleaned.
2. For damp mop, dilute Statguard® ESD Cleaner 10 to
1 (five (5) gallons of clean water to two (2) quarts of
cleaner concentrate). For scrub use 15 to 1.
3. Thoroughly mix the cleaner solution before damp
mop application. Use a clean, untreated mop to
damp mop the area. Wring out excess fluid and do
not flood a treated floor with water. For a scrubbing
machine use 175 to 350 RPM with red pad.
4. Allow 30 to 60 minutes drying time before walking
on the cleaned area.
*Do not
damp mop with high alkaline or high residue cleaner.
For Statguard® Finish, using harsh detergents can
damage a treated floor's ESD properties.
10558 Physical Properties:
Solids %: 2.5% - 4.5%
pH: 6.5 - 7.5
Color: Light Blue
Odor: None
Coverage: 20,000 sq.ft./gal. of
concentration (10558 = 100,000 sq/ft)
Freeze/Thaw Stability: Passes [Three (3) Cycles]
Drying Time: 30 - 60 min. @ 55% RH
Surface Resistivity: 1 x 106
to < 1 x 109
ohms per
ANSI/ESD STM7.1 and ESD
TR53
*Also Available In 2.5-Gallon Box - 10557
-Statguard® ESD Floor Cleaner Storage -
Storage
Statguard® ESD Floor Cleaner does not have a set life
span. The chemicals are not known to degrade over
time when stored at the proper temperature conditions
as stated in the Safety Data Sheet. We also recommend
that the product be stored in its original container and
be sealed when not in use.